Terms
All Categories
all-categories
Heat treated to tensile strength class 10.
Further special patterns available on request.
>>Click here for inch size T-Slot Nuts /Asset/metric_t_slot_nuts.jpg
-Extra thick flange nuts (hexagonal head).
-Machined from 12L14 bar stock.
-Case hardened. /Asset/flange_nuts.jpg
-Extra thick hex nuts.
-All machined form cold finished 12L14 bar stock.
-Case hardened.
-Full smooth threads.
-Washer bearing surface. /Asset/extra_thick_hex_nuts.jpg
Turned & Milled /Asset/metric_fixture_nuts.jpg
-Machined from 12L14 cold rolled steel bar.
-Beveled edge.
-Inside diameter is 1/64 to 1/32 over size of bolt.
-Small additional charge for case hardening, if desired. /Asset/extra_thick_flat_steel_washers.jpg
-Coupling Nuts/Extension Nuts are machined from 12L14 cold finished hex bar stock.
-Used as a coupling nut with studs to lengthen bolts.
-Extra charge for case hardening. /Asset/coupling_nuts_extension_nuts.jpg
-Heat treated to tensile strength class 10.
-For joining two studs DIN 6379.
-Minimum thread reach should be 1 x diameter.
-For functional and safety purpose bolts and studs to be coupled should be screwed in an either side to half the length of the nut.
>>Click here for inch size Coupling Nuts /Asset/metric_extension_nuts_coupling_nuts.jpg
-Double end threaded steel studs primarily for use with ZIP T-Slot Nuts.
-Made from high quality C-1038/45 Steel.
-Tensile strength Approx. 100,000 lbs.P.S.I.
-Studs can be heat treated to Grade 5 at additional charge. /Asset/double_end__steel_studs.jpg
Stud: Rolled Thread
M6 - M12 heat treated to strength class 10.9
M14 - M42 to class 8.8
For use with metric T-slot nuts
DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use DIN 787 T-slot bolts. /Asset/metric_double_end_studs.jpg
Drop forged steel set-up wedges are manufactured from C-1020/30 steel and are a machine shop necessity. /Asset/forged_steel_wedges.jpg
Made from C-1030 steel /Asset/forged_plain_clamp.jpg
Forged Steel U Clamps are made from C-1030 steel /Asset/u_clamps_forged_steel.jpg
Forged Gooseneck Clamps are made from C-1030 steel /Asset/gooseneck_clamps.jpg
Made from C-1030 steel /Asset/finger_clamps.jpg
-C-1030 steel
-Use with ZIP T-Slot Bolts. /Asset/Universal_Adjustable_Strap_Clamps.jpg
-C-1030 steel.
-To be used on vertical lifts.
-On angular lifts use with caution.
-Other sizes on request. /Asset/shoulder_eye_bolts.jpg
-Scrap pile methods are eliminated when setting up jobs on the planer etc.
-Quality grey iron casting.
-To be discontinued when stock expires. /Asset/4_sided_step_blocks.jpg
-Steel
-Black finish
-Adjustable in 1/8" increments
-1 Block = 2 Pieces /Asset/serrrated_step_blocks.jpg
-Heat treated steel bar.
-Black oxide finish.
-Step clamp teeth match all sizes of step blocks. /Asset/serrated_step_clamps.jpg
-Heat treated steel bar.
-Black oxide finish. /Asset/plain_clamps.jpg
T-Slot Bolts - ZIP Machine Table Style (inch sizes)
(145)A T-Slot Bolt is a bolt with a "T" shaped head that is designed to slide into the channel of a machine tool table for work holding during machining.
-T-Slot Bolts Hot Forged from C-1045 Steel. Class 3 N.C.
-Full smooth cut threads.
-Especially made for machine tool tables. Can not twist or jam in slots.
-T-Slot Bolts can be heat treated to grade 5 at additional charge.
T-Slot Nuts - (inch sizes) ZIP Brand
(11)A T-Slot Nut is a nut that is shaped like a "T" designed to slide into the channel of a machine tool table for work holding during machining. A stud is usually screwed into the top of the nut.
-T-Slot Nuts are all machined from cold finished steel bar stock.
-Case hardened.
-Other sizes on request.
-For use with ZIP Studs.
DIN 787 T-Slot Bolts (metric)
(76)A metric T-Slot Bolt is a bolt with a T shaped head that is designed to slide into the channel of a machine tool table for work holding during machining.
-Metric T-Slot Bolts are forged with milled T-slot guide faces
-Rolled thread.
-The strength class and AMF symbol is punched in the head.
-Other sizes available on request.
DIN 787 T-Slot Bolts with Nut & Washer (metric)
(76)Metric T-Slot Bolts can be purchased in combination with the nut and washer. Forged, with milled T-slot guide faces, rolled thread. The strength class and AMF symbol is punched in the head.
Other sizes available on request.
Heat treated to strength class 8.8
T-Slot Nuts (metric - DIN 508)
(37) A Metric T-Slot Nut is a nut that is shaped like a T designed to slide into the channel of a machine tool table for work holding during machining. A stud is usually screwed into the top of the nut.Heat treated to tensile strength class 10.
Further special patterns available on request.
>>Click here for inch size T-Slot Nuts /Asset/metric_t_slot_nuts.jpg
Flange Nuts (Hexagonal)- ZIP Brand (inch sizes)
(6) A Flange Nut is a hexagonal nut with a washer base. It may be used with a T-Slot Bolt or T-Slot Nut/Stud to tighten down work on a machine tool table.-Extra thick flange nuts (hexagonal head).
-Machined from 12L14 bar stock.
-Case hardened. /Asset/flange_nuts.jpg
Extra Thick Hex Nuts - ZIP Brand (inch sizes)
(6) Extra Thick Hex Nuts are hexagonal nuts that are extra thick with a washer bearing surface that is usually used with a Washer for work holding applications with a T-Slot Bolt or T-Slot Nut/Stud-Extra thick hex nuts.
-All machined form cold finished 12L14 bar stock.
-Case hardened.
-Full smooth threads.
-Washer bearing surface. /Asset/extra_thick_hex_nuts.jpg
DIN 6330 B Fixture Nuts (metric)
(15) Heat treated to tensile strength class 10.Turned & Milled /Asset/metric_fixture_nuts.jpg
DIN 6331 Collar Nut (metric)
(10)Forged Steel, Blackened
Tempered, Strength Class 10.9
Extra Thick Flat Steel Washers - ZIP Brand (inch sizes)
(12) An Extra Thick Flat Washer is a washer machined from steel bar which has chamfered edges and used to distribute the load of a threaded fastener.-Machined from 12L14 cold rolled steel bar.
-Beveled edge.
-Inside diameter is 1/64 to 1/32 over size of bolt.
-Small additional charge for case hardening, if desired. /Asset/extra_thick_flat_steel_washers.jpg
DIN 6340 Metric Washers (steel)
(15) Tempered Steel Hardened (1200-1400 N/mm2 tensile strength) /Asset/din_6340_metric_steel_washers.jpg Coupling Nuts - ZIP Brand (inch sizes)
(7) Coupling Nuts are hexagonal shaped nuts with an extended body usually used to couple two studs together (also known as Extension Nuts).-Coupling Nuts/Extension Nuts are machined from 12L14 cold finished hex bar stock.
-Used as a coupling nut with studs to lengthen bolts.
-Extra charge for case hardening. /Asset/coupling_nuts_extension_nuts.jpg
DIN 6334 Coupling Nut (metric)
(15) A Metric Coupling Nut is a hexagonal nut with an extended body usually used to couple two studs together.-Heat treated to tensile strength class 10.
-For joining two studs DIN 6379.
-Minimum thread reach should be 1 x diameter.
-For functional and safety purpose bolts and studs to be coupled should be screwed in an either side to half the length of the nut.
>>Click here for inch size Coupling Nuts /Asset/metric_extension_nuts_coupling_nuts.jpg
Double End Steel Studs - ZIP Brand (inch sizes)
(78) A Double End Steel Stud is a stud threaded on both ends to be screwed into a T-Slot Nut on one end and Hex Nut or Flanged Hex Nut on the other end.-Double end threaded steel studs primarily for use with ZIP T-Slot Nuts.
-Made from high quality C-1038/45 Steel.
-Tensile strength Approx. 100,000 lbs.P.S.I.
-Studs can be heat treated to Grade 5 at additional charge. /Asset/double_end__steel_studs.jpg
DIN 6379 Double End Steel Studs (metric)
(89) Metric Double End Studs are studs threaded on both ends to be screwed into a T-Slot Nut on one end and Hex Nut or Flanged Hex Nut on the other end.Stud: Rolled Thread
M6 - M12 heat treated to strength class 10.9
M14 - M42 to class 8.8
For use with metric T-slot nuts
DIN 6379 double-ended threaded studs are typically used when it is not possible or practical to use DIN 787 T-slot bolts. /Asset/metric_double_end_studs.jpg
ZIP Forged Steel Set-Up Wedges (inch)
(3) A Steel Set Up Wedge is a drop forged piece of steel in the shape of a tapered incline used for leveling equipment, flanging pipe, etc.Drop forged steel set-up wedges are manufactured from C-1020/30 steel and are a machine shop necessity. /Asset/forged_steel_wedges.jpg
ZIP Forged Plain Clamp (inch)
(4) A Forged Plain Clamp is a forged flat bar clamp used for work holding applications in a machine shop.Made from C-1030 steel /Asset/forged_plain_clamp.jpg
U Clamps- Forged Steel ZIP Brand (inch sizes)
(5) U Clamps are forged clamps in the shape of a "U" designed for work holding application in a machine shop.Forged Steel U Clamps are made from C-1030 steel /Asset/u_clamps_forged_steel.jpg
Forged Gooseneck Clamps - ZIP Brand (inch sizes)
(3) A Forged Gooseneck Clamp is a forged bar clamp with an offset designed for work holding applications in a machine shop.Forged Gooseneck Clamps are made from C-1030 steel /Asset/gooseneck_clamps.jpg
ZIP Forged Finger Clamp (inch)
(3) Finger Clamps are forged bar clamps with a finger like end on one end designed to hold a tooling die in place.Made from C-1030 steel /Asset/finger_clamps.jpg
ZIP Forged Universal Adjustable Strap Clamps (inch)
(3) A Universal Adjustable Strap Clamp is a curved bar clamp with an adjustable sliding saddle designed for work holding applications-C-1030 steel
-Use with ZIP T-Slot Bolts. /Asset/Universal_Adjustable_Strap_Clamps.jpg
ZIP Forged Shoulder Eye Bolts (inch)
(4) A Forged Shoulder Eye Bolt is a round forged eye bolt with a shoulder and short threaded shank designed for vertical lifting.-C-1030 steel.
-To be used on vertical lifts.
-On angular lifts use with caution.
-Other sizes on request. /Asset/shoulder_eye_bolts.jpg
ZIP Four-Sided Step Blocks (inch)
-Scrap pile methods are eliminated when setting up jobs on the planer etc.
-Quality grey iron casting.
-To be discontinued when stock expires. /Asset/4_sided_step_blocks.jpg
ZIP Serrated Step Blocks (inch)
(9) A Serrated Step Block ia a 2 piece block machined from bar with serrations for adjustable heights used in work holding applications in a machine shop.-Steel
-Black finish
-Adjustable in 1/8" increments
-1 Block = 2 Pieces /Asset/serrrated_step_blocks.jpg
ZIP Serrated Step Clamps (inch)
(12) A Serrated Step Clamp is a machined bar clamp with serrations designed to be used with serrated step blocks for work holding in a machine shop.-Heat treated steel bar.
-Black oxide finish.
-Step clamp teeth match all sizes of step blocks. /Asset/serrated_step_clamps.jpg
ZIP Plain Clamps (inch)
(12) A Plain Clamp is a machined bar clamp for work holding applications in a machine shop.-Heat treated steel bar.
-Black oxide finish. /Asset/plain_clamps.jpg
